Minerals such as calcium, magnesium are the ones that make our water hard. They leave deposits that clog pipes, stain tiles, and glass, leave residue on skin and hair, and prevent soap from foaming. While there is no confirmed health risk associated with using this water, it is an inconvenience. There are several ways to turn your hard water into soft water.
Soften Your Water Right Before Using It
You could use boiled water for your household chores such as cleaning the bathroom and kitchen, brushing, washing your hair, and bathing. That is to better the effectiveness of your cleaning products.
- Boil your water
- Let it cool
- You shall see visible particles of lime and these tend to float on the water. Scoop that layer off before using the water.
- Let the water sit for a little more time so that the particles eventually sink
- Pour out or scoop the water without disturbing the settled particles
- Pour away the water that contains the lime.
Use Lime or Washing Soda
Some years back, homes with hard water softened it using lime or washing soda. They would pour water into open large cans and add a little of their choice substance. The water would stand for some days before the top would get drawn for use.
However, owing to the amount of water needed, the method is not common today
Use Washing Soda, Borax or Ammonia
You need to add one of these substances to your water at the same time you are adding detergent. While the water shall not get soft, the mixture used stops the lime from interfering with the detergent hence allowing for lather to form. You need to follow the instructions on the package of the substance before use.
Put 1 pound of washing soda into a ¼ a gallon of boiling water. Once it has cooled, keep this mixture in a closed container. Add two tablespoons of the mixture to 1 gallon of water for cleaning.
Put a ¼ tablespoon of lye in a cup of water. Mix this into a gallon of water
Use a Water Filter Pitcher With Softening Abilities
These are available in stores in different brands. Some of these pitchers provide water softening that helps water and beverages such as tea to retain their aroma and flavor.
Put a Water Softening Filter on the Bathroom and Kitchen Sink Faucets
That enables water to get softened as it flows through the tap. It is the easiest way to get soft water for cleaning. Some of these filter models have got switch-off valves. That means that you can get water from the tap without it passing through the filter.Read our post to get more info about types of faucets.
Install a Reverse Osmosis System
Install a Mechanical Softener Device That Replaces Hard Water Minerals With Sodium
It is a very effective way to soften that hard water. These softeners increase water heater efficiency, improve the life of your fabrics and other items that are regularly washed , and prevent limescale. You may consider buying a good reverse osmosis system instead, read more in ro-system.org website.
There are many softener units, and they vary in price, effectiveness, and operational costs. Before buying one, you need to test the water it produces.
Install a Magnetic Water Conditioner
This device magnetizes the calcium ions. This alteration prevents them from causing buildups.
A water conditioner is not costly, is easy to operate, and gives you water that is safe for human consumption.
However, conditioners may be ineffective in some areas, and it is not always a guarantee that they shall give you soft water. The degree at which they soften water is lower than that of mechanical softeners.
Softening water reduces the amount of money used on cleaning products. That is because you use fewer products when the water is soft. You might want to check www.softwaterlab.com to read the best reviews for water softeners.
Energy bills also reduce because cleaning things becomes easier and mineral buildup is either no more or significantly reduced.
Your pipes and household appliances can also last longer since there are no more hard water mineral deposits.
In as much as softening water comes at a cost, the benefits outweigh the operational costs. Besides that, the savings you make when using soft water offset the costs. Therefore, it is cheaper to soften water than to use hard water.
When your shower head gets clogged, it tends to spray unevenly. For free water flow, you need to get rid of these deposits. Here are some ways to do that.
Clean Your Showerhead Using Vinegar
Instead of using harsh cleaning substances, use vinegar to clean up your fixture. Here is how to do it:
Distilled white vinegar is very effective, safe and cheap
- Distilled white vinegar
- Teflon tape
- Wrench; to remove the showerhead
- Check for deposit build up. The presence of deposits causes a discoloration, more so when it has taken some time before the last cleaning
- Fill your saucepan with a good amount of distilled white vinegar. It should be enough for you to completely immerse the showerhead
- Using your wrench, unscrew the fixture and put it in the saucepan
- Place the pan on the fire and allow the contents to simmer for some minutes. The amount of time depends on the quantity of buildup in the head. Keep a close watch on the contents of the pan. Do not boil or subject the saucepan to a boiling flame lest the fixture melts. You must also make sure that the fixture is floating rather than sitting at the bottom of the pan.
- After the fixture has simmered, and the deposits have got washed off, take it out of the vinegar and rinse it. Screw it back and turn on the water. That ensures that all the deposits have been thoroughly rinsed off
- Before replacing the showerhead, apply some Teflon tape on the pipe threads. That helps in preventing leakages. Remember to wrap it in the clockwise direction.
- Saucepan (for warming alone)
- Teflon tape
Are you weary of heating up your fixture? You could use this method.
- Unscrew the showerhead
- Soak the fixture in a bowl of vinegar for 1 – 2 hours. However, the time depends on the amount of mineral deposits. You may have to soak it for more than 2 hours, probably overnight if the build up is too much.
However You Could Use Warm Vinegar
- Warm the vinegar
- Remove it from the fire
- Place your showerhead in the pan of warm vinegar
- Leave it for 1 or two hours. Check on it to see how clean it has become. If the results are not satisfactory, let the head stay in for a little longer.
Before replacing the showerhead, apply some Teflon tape on the pipe threads. That helps in preventing leakages. Remember to wrap it in the clockwise direction.
You should also turn the water no to flush out any remaining build-up.
Vinegar And a Plastic Cover
If you do not want to unscrew the fixture, you could use this method. This method is also best suited for fixtures that are of stainless steel, chrome or any other protected metal surfaces.
- Plastic bag or shower cap
- String, twist tie or rubber band (to tie the plastic bag onto the head)
- Get a sandwich sized bag or a shower cap that has not lost its elasticity. Pour vinegar into it
- Pull the wrapping over the fixture
- Tie it tightly using a rubber band or string. Make sure that it is tight enough. You may want to loop the rubber band or string around the shower arm as well so that the plastic bag or shower cap does not fall off.
- Leave it overnight and by morning, your shower head shall look as good as new. That is because the vinegar performs intensive cleaning on it.
- Turn on the water to flush out any remaining build-up. After that, polish the fixture with a cloth.
Rub the Nozzles
There are some showerheads that have got nozzles. They also need to get cleaned. You can deal with the buildup here by massaging every nozzle using your finger. You may also use a toothbrush to give the nozzles a gentle scrub. If it is time to but a new shower head, you can check the reviews of best products at finest shower.
I believe that these cleaning tips shall enable you to enjoy your showering experience.
Winter season is coming again, perfect time to decide for your heaters. A god number of heaters available in the market by then. Introduced again now are the baseboard heater. How these heaters differ from the most common space heaters like ceramic, oil filled, radiant and micathermic. Confused now of what heaters to buy? So, what are the things to consider when buying a baseboard heater?
Baseboard heater is most preferred by household members. Many buyers have appreciated their heating solutions. This heater does not demand more space, small space will do.
Anyhow some things to remember when buying a baseboard heater.
Wattage capacity. The power wattage of baseboard heater ranges from 500 to 2000 watts. Note that satisfaction of performance is affected by the wattage requirement of the unit you buy. But, pick one that your value of money is not compromise as well as the heating temperature that is required for your rooms. Should your space is only good enough for 500 watts or translated into around 50 ft. then buy the lower wattage power.
Ensure that you buy baseboard heaters which are encased in metal sheaths and surrounded by aluminium fins. These features of the heaters are intentionally made to facilitate transfer of heat. Henceforth, in quoting for the best kind of baseboard heaters in the market, always see to it that you find them encased in metal sheath and aluminium. Absence of this feature may find you nothing but the poor heaters may be.
Other things to consider when buying a baseboard heater are the quality of efficiency and safe operation other than quiet. Base board heaters have convection; this convection will draw up the cold air near the floor and warm this up and is eventually release. This makes the room warm.
Note, this heater is operationally friendly. This can be operated in such a way that the convection powered cycle will ensure the desired temperature. And always remember, most efficient baseboard heaters have the capacity to shut off automatically. Absence of this might as well compromise your advantage on the product.
Practically, many buyers opt to buy baseboard heater because they can just mount this underneath windows. The fact that this heater is controlled by the thermostat of the environment they are most likely installed, windows are the recommended areas to install.
This heater is available in either hydronic or electrically supplied your option to make. In addition, these heaters do not over heat. They have automatic safety measures. These products automatically shut off when enough heat is desired.
Therefore, buy baseboard heaters that speak for the quality of the products. It pays to remember the things when buying baseboard heaters than relying much on the power of advertisements. Do not forget, advertisements have the power to make you believe. You must decide for yourself guided by the wisdom shared about baseboard heaters. Rest assured this heater will provide you of the quality and the desired warmth that you and your love one needs.
Technology never stops pleasing the need of people like that a massage chair. Massage chair have been crowding in the market. People have more options to choose from. But for long users of massage chair, they want something new. Yes, technology never fails the desires of people. Introducing the zero gravity in massage chair, the newest feature in massage chair.
Users of massage chair have experienced the common benefits of massage chair in their lives. Well, they know by the fact that massage chair can relieve their pain and stress. This chair has especially designed nodes and rollers to make them feel relax by relief of pain and stress. For most overworked people, they seek refuge from this facility. Their muscles have been toned down, the pain of their neck, back and shoulder are relief. Should they need their muscle to relax, they will only sit down on the massage chair for 10 to 15 minutes and the amazing result, everything is light and easy.
Have you been pressured to beat deadline for the day and you slouched? Then sit on the massage chair. The chair gives you the right amount of support that your back neck and eventually stretching all those muscles and nerves and you are back in your normal posture.
Through massage chair, users have sought refuge for their irregular blood pressure and poor blood circulation. Then, let the chair does its job. The nodes and rollers’ manipulation of the body’s reflex points allow the release of all sorts of toxins in our body. Normally, when people submit to human massage, they sweat out. Same with the massage chair, the release of toxins are manifested by the sweat that comes out from the body.
How about this zero gravity in massage chairs work? Simple. This is actually a function of the massage chair which reclines the chair in a point where the user’s legs are higher than their torso. Given this position, the manipulators like the nodes and rollers will be given the way to take a deeper and more intense massage, giving the users a unique sensation felt by many astronauts known as lift-off. Most sufferers of varicose vein pain are relieved from this kind of reclining position of the massage chair. In addition to this, by the automated zero gravity function, increase blood circulation of the body is achieved.
In addition to that, this kind of reclining, allows the users weight to be distributed and giving them the feeling light experience or commonly known as weightless state. Consequently, feeling light and easy is more than a relaxing state.
Therefore, should you buy one good massage chair for yourself, you may read more in Massage Chair Lab, look for this zero gravity in massage chairs? This will give you a more amazing and relaxing state. Surely, by owning one with this feature will make your health in good shape amidst the pressure and stress in your day to day life’s activities.